Fill-In

Problem:

Print impression is excessive.

Solution:

Reset plate pressure to “kiss” impression.

______________________________________________________________________

Problem:

Water-based ink pH is too low.

Solution:

Increase water-based ink pH.

______________________________________________________________________

Problem:

Ink is drying too fast.

Solution:

Add slower drying solvents to reduce tack. Tacky inks will usually show stringing from type edges.

______________________________________________________________________

Problem:

Plates are worn, uneven, cupped or poorly made.

Solution:

Check plates and replace if necessary.

______________________________________________________________________

Problem:

Ink viscosity is too high.

Solution:

Reduce ink viscosity.

______________________________________________________________________

Problem:

Plate relief height is incorrect.

Solution:

Adjust plate relief to correct height range.

______________________________________________________________________

Problem:

Foreign matter appears in ink.

Solution:

Filter or replace ink; eliminate source of contamination.