Metering Roller Build-up

Problem:

Fountain solution circulation system is contaminated.

Solution:

Drain, clean, flush, replace filters and refill with fresh fountain solution. Desensitize rollers.

______________________________________________________________________

Problem:

Fountain solution mix is improper.

Solution:

Check pH, conductivity, Brix level and temperature. Ensure pan temperature is no higher than 65°F (18°C).

______________________________________________________________________

Problem:

Automatic dosing systems are faulty.

Solution:

Check to make sure that doser is dispensing desired levels of chemistry (perform a “jug test”).

______________________________________________________________________

Problem:

Rollers are set improperly.

Solution:

Check settings and the skew of the metering roller and reset to manufacturer specifications.

______________________________________________________________________

Problem:

Roller durometer is wrong.

Solution:

Replace rollers with recommended durometer.

______________________________________________________________________

Problem:

Pan roller is greasy or contaminated.

Solution:

Clean and desensitize the chrome roller with a good chrome roller cleaner and follow up with a hot water / white vinegar (2:1) wash-up.